(1) Heating and melting lead fired by gas or oil, lead melting time is shorter with low consumption. (2) Heat-insulating power of electrical heating is from 30 to 60 KW, start working at low output, insuring temperature of lead liquid. High-power electrical heating pipes are inserted across lead boiler, easily repaired and replaced.
(3) Several water-cooling pipes are fixed at foreside of lead bath. Water-cooling pipes are also inserted across lead bath, being on safe side.
(4) Dual controller is adopted to control lead temperature, temperature being specified at ± 2º C
(5) Lead bath is matched with the lead pump circulating system, uniform the temperature of front and back lead liquid.
(6) Matched with high hardness semicircle wear-resisting roller, reducing the unfavorable element caused by roller to groove.
Size of furnace
6.5 ,7.5 ,9 ,11 length
Size of lead bath
5.5 ,6.5 ,8.0 , 9.0 ,10.0length
1.0 ,1.2 ,1.4 ,1.5width
Number of steel wire
12 ,14 ,16 ,18 , 20 ,24 28 ,32 ,36
water-cooling with inserted pipe, lead liquid circulating
electrical heat-insulating capacity of installed set